Deluxe Lotus Incense Tracer Gift Set
€120,00
Skip to product information
Deluxe Lotus Incense Tracer Gift Set
€120,00
Tracked delivery within 7 to 15 business days
Free delivery from €60
Secure payment
Lotus Trail Incense Deluxe Set – 31 pieces
This set brings together the equipment needed to prepare trail incense: fragrant powder is deposited in a line on a bed of ash, then lit at one end so that the ember gradually follows the pattern.
It includes a metal burner, ash, several stencil plates, fine tools, and 12 vials of fragrant powder. The accessories are used to level the ash, fill the pattern, remove excess, and correct a line before lighting.
Unlike a ready-to-burn incense stick, trail incense requires a few minutes of preparation. The consistency of the ash, the quantity of powder, and the removal of the stencil directly influence the continuity of the burn.
SEE THE PRINCIPLE OF TRAIL INCENSE
INFORMATION
The ash forms a flat, heat-resistant base. The stencil plate is placed on top, then filled with powder before being lifted vertically to keep the line intact.
A line that is too thin, interrupted, damp, or unevenly filled may extinguish before the end. For your first attempts, a short line allows you to adjust the powder quantity before preparing a full pattern.
SPECIFICATIONS
- Format: 31-piece set
- Storage: decorated wooden box
- Burner: metal with openwork lid
- Tools: fine accessories for leveling, filling, correcting, and handling the powder
- Incense: 12 vials of fragrant powder
The visible labels include profiles featuring sandalwood, agarwood, frankincense, tea, and amber accords. Some scents may be present in multiple vials.
USAGE
- Pour an even layer of ash into the burner.
- Level the surface without packing it down too much.
- Place the stencil plate perfectly flat.
- Distribute the powder into the pattern, then remove the excess.
- Slowly lift the plate vertically.
- Light one end and check that the ember follows the line.
If the trail breaks when removing the stencil, first check that the ash is flat and that the plate has not slid laterally. If it always goes out in the same spot, look for a gap or an insufficiently filled area.
MAINTENANCE & SAFETY
Let the burner and ash cool completely before removing any residue. Wipe the tools after use and keep the powders tightly closed in a dry place.
Always use the burner on a stable, clear, and heat-resistant surface. Keep it away from paper, textiles, curtains, dry plants, and other flammable materials.
Never leave burning incense unattended. Keep out of reach of children and pets, and ventilate the room after use.
TO PAIR WITH
The set already contains the burner, ash, tracing tools, and powders needed to get started: no additional accessories are required.
If a line goes out, breaks during stencil removal, or burns unevenly, consult the IKANE trail incense guide .
To discover other formats currently offered—short sticks, incense coils, Nag Champa, agarwood, and burners—consult the Incense collection .
♥ IKANE WORKSHOP TIP
Start with a short trail. If it burns to the end, keep the same thickness and density of powder for the next pattern. This ensures your setup works before using more material.